Products
The S4014 serves projects that need a 4-ton telehandler for mid-to-high-level delivery. Its listed maximum lift height is 13.8 m and maximum outreach is 7 m, allowing crews to move suitable pallets and components from staging areas to elevated work positions. The specification lists a 114 HP engine, four-wheel steering and drive, and 167 L/min hydraulic flow. This configuration fits contractors who need more lift height than the 9.8 m class while working within a moderate outreach envelope. Always compare the planned load, attachment and boom position with the applicable load chart.
The S4014 serves projects that need a 4-ton telehandler for mid-to-high-level delivery. Its listed maximum lift height is 13.8 m and maximum outreach is 7 m, allowing crews to move suitable pallets and components from staging areas to elevated work positions. The specification lists a 114 HP engine, four-wheel steering and drive, and 167 L/min hydraulic flow. This configuration fits contractors who need more lift height than the 9.8 m class while working within a moderate outreach envelope. Always compare the planned load, attachment and boom position with the applicable load chart.
Applications Mid-rise construction and building envelope work Precast and component staging where the setup area is close to the placement point Industrial yards handling stock across more than one storage level
Model Advantages 4,000 kg rated capacity for heavy site loads 13.8 m maximum lift height for upper-level staging 7 m maximum outreach supports placement from a practical set-back position
| S4014 TELEHANDLER | TECHNICAL SPECIFICATIONS | ||
| Source: supplied S4014 specification sheet. Prices excluded. Engine and equipment options are identified as listed. | ||
| SECTION | PARAMETER | SPECIFICATION / OPTION |
| CAPACITY | Rated capacity | 4,000 kg |
| CAPACITY | Maximum lifting height | 13.8 m |
| CAPACITY | Maximum outreach | 7 m |
| DIMENSIONS | Overall length to carriage | 6.4 m |
| DIMENSIONS | Length to fork face | 7.62 m |
| DIMENSIONS | Overall width | 2.4 m |
| DIMENSIONS | Overall height | 2.55 m |
| DIMENSIONS | Wheelbase | 3.15 m |
| DIMENSIONS | Ground clearance | 0.33 m |
| DIMENSIONS | Overall cab width | 0.84 m |
| DIMENSIONS | Tilt-up angle | 12° |
| DIMENSIONS | Tilt-down angle | 114° |
| DIMENSIONS | External turning radius over tires | 4.1 m |
| DIMENSIONS | Unladen weight with forks | 10,900 kg |
| TIRES AND FORKS | Tire type | Tubeless |
| TIRES AND FORKS | Standard tires | 440/80-24 |
| TIRES AND FORKS | Fork dimensions | 1,220 mm × 125 mm; section 50/50 mm |
| PERFORMANCE | Lifting time | 16 s |
| PERFORMANCE | Lowering time | 12.4 s |
| PERFORMANCE | Extension time | 17.8 s |
| PERFORMANCE | Retraction time | 13 s |
| PERFORMANCE | Crowd time | 4.3 s |
| PERFORMANCE | Dump time | 4 s |
| ENGINE | Base engine brand | Yuchai |
| ENGINE | Base engine emissions standard | National III (as listed in source) |
| ENGINE | Maximum fuel sulfur content | 5,000 ppm |
| ENGINE | Engine model | YCD4J22T-125 |
| ENGINE | Cylinders / displacement | 4 cylinders / 4,400 cm³ |
| ENGINE | Rated power | 114 HP / 85 kW |
| ENGINE | Maximum torque | 400 Nm @ 1,400 rpm |
| ENGINE | Drawbar pull (laden) | 9,930 daN |
| TRANSMISSION AND BRAKES | Transmission type | Torque converter (optional) |
| TRANSMISSION AND BRAKES | Forward / reverse gears | 4 forward / 4 reverse |
| TRANSMISSION AND BRAKES | Maximum travel speed | 40 km/h |
| TRANSMISSION AND BRAKES | Parking brake | Automatic air-cut parking brake (optional) |
| TRANSMISSION AND BRAKES | Service brake | Immersed multi-disc brakes on front and rear axles |
| HYDRAULICS | Hydraulic pump type | Gear pump (optional) |
| HYDRAULICS | Hydraulic flow | 167 L/min |
| HYDRAULICS | Hydraulic pressure | 265 bar |
| CAPACITIES AND NOISE | Engine oil capacity | 5.5 L |
| CAPACITIES AND NOISE | Hydraulic oil capacity | 70 L |
| CAPACITIES AND NOISE | Fuel tank capacity | 95 L |
| CAPACITIES AND NOISE | Noise at driver position | 79 dB |
| CAPACITIES AND NOISE | Noise to environment | 106 dB |
| CAPACITIES AND NOISE | Vibration at hands / arms | <2.5 m/s² |
| DRIVE AND SAFETY | Steering wheels (front / rear) | 2 / 2 |
| DRIVE AND SAFETY | Drive wheels (front / rear) | 2 / 2 |
| DRIVE AND SAFETY | Cab safety standard | FOPS Level 2 cab |
| OPTIONAL EPA ENGINES | EPA engine option | Cummins |
| OPTIONAL EPA ENGINES | EPA engine option | Fiat |
| OPTIONAL EPA ENGINES | EPA engine option | Perkins |
| OPTIONAL EPA ENGINES | EPA engine package note | Select the required engine model and EPA certification for the destination market. |
Pallet forks support packaged construction materials. A mixer, grab bucket or bale clamp may be considered for other work after hydraulic and capacity verification.
Use S4014-specific inputs such as monthly lifts above 10 m, lift-equipment rental days replaced, average crew time per placement and the labor rate. Include the quoted installed price and annual operating costs. Annual net benefit = labor savings + rental savings + additional gross margin - fuel, service, insurance and operator costs. Payback months = installed purchase cost / (annual net benefit / 12). Annual ROI = annual net benefit / installed purchase cost x 100%. Use actual production records rather than a general productivity estimate.
A: Our mechanical equipment is widely applied in construction engineering, factory handling, logistics loading and unloading, metal processing and industrial automation fields. It features stable performance, high efficiency and durable structure.
A: Yes, we support OEM & ODM customization. We can adjust the size, power, configuration, color and logo as your actual working conditions.
A: Normally the delivery time is 15–30 working days after receiving the deposit. For customized machines, the lead time will be confirmed according to specific drawings and requirements.
A: We accept T/T, L/C at sight. Usually 30% deposit in advance, 70% balance before shipment.
A: We provide 12 months warranty for all machines. Within the warranty period, we supply free spare parts and technical support. Lifetime online after-sales service is available.
A: Yes. We offer detailed English manual, operation video and remote online guidance. If needed, we can also arrange professional engineers for overseas on-site service.
A: Standard export wooden box / fumigation wooden package, suitable for sea and air transportation, to avoid damage during long-distance delivery.
A: Warmly welcome you to visit our factory anytime. We can arrange pick-up service and show you our production workshop and testing process.
3500kg Rough Terrain Telehandler for Construction Sites
3000kg Rough Terrain Telehandler for Farm & Construction
5 Ton Telehandler for Construction and Farm Applications
