The listed configuration includes a 114 HP (85 kW) Yuchai engine, pneumatic 16/70-20 tires, a 9,500 kg operating weight with forks, and a maximum travel speed of 35 km/h. Attachment and engine options may vary by order.
The S3510 is a rough-terrain telehandler designed to lift, carry, and place materials across construction and industrial sites. The image shows the machine equipped with a fork carriage and telescopic boom for handling palletized or bundled loads. Its rated capacity is 3,500 kg, with a maximum lifting height of 10.5 m and a maximum outreach of 6.1 m.
The listed configuration includes a 114 HP (85 kW) Yuchai engine, pneumatic 16/70-20 tires, a 9,500 kg operating weight with forks, and a maximum travel speed of 35 km/h. Attachment and engine options may vary by order.
| S3510 Telehandler Technical Specifications | ||
| Source: Supplied S3510 technical specifications Word document | ||
| CATEGORY | SPECIFICATION | VALUE |
| Capacity | Rated capacity | 3,500 kg |
| Capacity | Maximum lifting height | 10.5 m |
| Capacity | Maximum outreach | 6.1 m |
| Dimensions | Overall length to carriage | 5.3 m |
| Dimensions | Length to fork face | 7 m |
| Dimensions | Overall width | 2.2 m |
| Dimensions | Overall height | 2.55 m |
| Dimensions | Wheelbase | 3.15 m |
| Dimensions | Ground clearance | 0.35 m |
| Dimensions | Overall cab width | 0.84 m |
| Dimensions | Tilt-up angle | 12° |
| Dimensions | Tilt-down angle | 114° |
| Dimensions | External turning radius over tires | 4.25 m |
| Dimensions | Unladen weight with forks | 9,500 kg |
| Tires And Forks | Tire type | Pneumatic |
| Tires And Forks | Standard tires | 16/70-20 |
| Tires And Forks | Fork dimensions | 1,220 mm × 125 mm; section 50 mm |
| Performance | Lifting time | 10 s |
| Performance | Lowering time | 7 s |
| Performance | Extension time | 12 s |
| Performance | Retraction time | 8.6 s |
| Performance | Crowd time | 4.8 s |
| Performance | Dump time | 3.4 s |
| Engine | Base engine brand | Yuchai |
| Engine | Base engine emissions standard | National III (as listed in source) |
| Engine | Maximum fuel sulfur content | 5,000 ppm |
| Engine | Engine model | YCD4M22T-105 |
| Engine | Cylinders / displacement | 4 cylinders / 4,400 cm³ |
| Engine | Rated power | 114 HP / 85 kW |
| Engine | Maximum torque | 400 Nm @ 1,400 rpm |
| Engine | Drawbar pull (laden) | 10,000 daN |
| Transmission And Brakes | Transmission type | Torque converter (optional) |
| Transmission And Brakes | Forward / reverse gears | 4 forward / 4 reverse |
| Transmission And Brakes | Maximum travel speed | 35 km/h |
| Transmission And Brakes | Parking brake | Automatic air-cut parking brake (optional) |
| Transmission And Brakes | Service brake | Immersed multi-disc brakes on front and rear axles |
| Hydraulics | Hydraulic pump type | Gear pump (optional) |
| Hydraulics | Hydraulic flow | 100 L/min |
| Capacities And Noise | Engine oil capacity | 5.5 L |
| Capacities And Noise | Hydraulic oil capacity | 70 L |
| Capacities And Noise | Fuel tank capacity | 95 L |
| Capacities And Noise | Noise at driver position | 82 dB |
| Capacities And Noise | Noise to environment | 105 dB |
| Capacities And Noise | Vibration at hands / arms | <2.5 m/s² |
| Drive And Safety | Steering wheels (front / rear) | 2 / 2 |
| Drive And Safety | Drive wheels (front / rear) | 2 / 2 |
| Drive And Safety | Cab safety standard | FOPS Level 2 cab |
| Optional Epa Engines | EPA engine option | Cummins |
| Optional Epa Engines | EPA engine option | Fiat |
| Optional Epa Engines | EPA engine option | Perkins |
| Optional Epa Engines | EPA engine package note | Select the required engine model and EPA certification for the destination market. |
| Notes | Some components are optional. Engine emission standard is listed as National III in the supplied specification. Confirm the selected configuration and destination-market compliance before ordering. |
The S3510 can support material handling and elevated placement tasks in applications such as:
A: Our mechanical equipment is widely applied in construction engineering, factory handling, logistics loading and unloading, metal processing and industrial automation fields. It features stable performance, high efficiency and durable structure.
A: Yes, we support OEM & ODM customization. We can adjust the size, power, configuration, color and logo as your actual working conditions.
A: Normally the delivery time is 15–30 working days after receiving the deposit. For customized machines, the lead time will be confirmed according to specific drawings and requirements.
A: We accept T/T, L/C at sight. Usually 30% deposit in advance, 70% balance before shipment.
A: We provide 12 months warranty for all machines. Within the warranty period, we supply free spare parts and technical support. Lifetime online after-sales service is available.
A: Yes. We offer detailed English manual, operation video and remote online guidance. If needed, we can also arrange professional engineers for overseas on-site service.
A: Standard export wooden box / fumigation wooden package, suitable for sea and air transportation, to avoid damage during long-distance delivery.
A: Warmly welcome you to visit our factory anytime. We can arrange pick-up service and show you our production workshop and testing process.
3000kg Rough Terrain Telehandler for Farm & Construction
4000kg Telehandler for Construction & Farm Material Handling
5 Ton Telehandler for Construction and Farm Applications
