News
background

What Information Is Needed for a Jib Crane Quotation?

November. 11, 2026

A jib crane quotation is a supplier’s estimate for a crane system based on your lifting requirements, building conditions, and operating environment. To receive a useful quote, provide details such as rated capacity, jib arm reach, lift height, mounting type, and duty cycle. A complete request helps a manufacturer recommend a suitable design, identify installation needs, and reduce costly changes before purchase. This guide explains What Information Is Needed for a Jib Crane Quotation? and how to prepare those details.

What Information Is Needed for a Jib Crane Quotation?
Accurate application and site details help a supplier assess a jib crane configuration.

Why Accurate Jib Crane Quotation Information Matters

Jib cranes support repetitive lifting and positioning tasks in workshops, warehouses, production lines, and maintenance areas. Their rotating boom can serve a defined work zone without requiring a full bridge crane system. A well-matched Column Mounted Jib Crane, for example, can handle local workstation lifting when the floor foundation and available clearance are suitable.

Jib cranes developed alongside industrial material-handling systems as manufacturers sought practical ways to move loads between nearby workstations. Modern designs may use a manual or powered hoist, a fixed or rotating boom, and several mounting arrangements. The right configuration depends on the actual load path and site—not simply the crane’s rated capacity.

Incomplete data can lead to an unsuitable hoist, insufficient clearance, an incorrect boom length, or unexpected foundation work. Providing the information below gives the supplier a stronger basis for checking the design and preparing a comparable commercial offer.

What Information Is Needed for a Jib Crane Quotation?

Use this jib crane quotation checklist when contacting Shandong Seven Sword Machinery Equipment Co., Ltd. or another crane supplier. If a detail is unknown, mark it as “to be confirmed” rather than guessing.

InformationWhat to provideWhy it matters
Rated capacityMaximum load weight, including the hook block or lifting attachment where relevantSets the required safe working load and affects structural and hoist selection
Load detailsTypical and maximum loads, load shape, lifting points, and center of gravityHelps assess load control, sling arrangement, and any special attachment needs
Jib arm reachRequired working radius, measured from the column or pivot center to the load centerDefines the coverage area and influences boom design and support reactions
Lift height and clearanceFloor-to-hook height, building height, overhead obstructions, and required headroomConfirms hoist travel and checks for interference with beams, lights, or services
Mounting arrangementColumn-mounted, wall-mounted, or another configuration; include available structural or foundation informationDetermines how crane forces transfer into the building or foundation
Rotation and coverageRequired rotation angle, work-zone sketch, and any restricted areasHelps establish whether the crane can serve the required stations safely
Operating dutyLifts per hour or shift, operating hours, average load, and expected service lifeSupports selection of the hoist duty classification, motor, brake, and components
Controls and powerManual or electric operation, control method, and available voltage and frequencyEnsures the offered equipment is compatible with the site and operators
Environment and complianceIndoor or outdoor use, temperature, dust, moisture, corrosive exposure, and applicable local regulationsMay affect protective finishes, electrical protection, design criteria, and documentation
Delivery and installationDelivery location, access limits, unloading arrangements, installation scope, and target dateHelps clarify logistics, site work, and the overall project schedule

1. State the Load and Lifting Task

Give the maximum load in kilograms or tonnes and explain what is being lifted. Include the weight of fixtures or lifting devices when they are part of the suspended load. Note whether the load is balanced, awkward, fragile, hot, or likely to swing. If loads vary, provide both the typical load and the heaviest load.

Do not select crane capacity from the product’s nameplate alone. The supplier needs to know the complete suspended load and intended use to assess the hoist, trolley, boom, pivot, and support structure.

2. Specify Reach, Height, and Coverage

Measure the required working radius from the crane’s rotation axis to the center of the load—not just to the edge of the work area. State the hook height needed at the highest operating position and identify the lowest overhead obstruction. A simple floor plan with dimensions can resolve ambiguities faster than a written description.

For example, a request might specify a 500 kg maximum load, a 5 m working radius, a 4.5 m required hook height, and 180-degree rotation. These are illustrative values, not a recommended design; the supplier must check them against the building and application.

3. Identify the Mounting Structure and Site Conditions

For a Column Mounted Jib Crane, share the proposed installation location, floor construction, foundation drawings, and any known concrete or reinforcement details. For a wall-mounted unit, provide information about the supporting wall or column and its structural drawings. Photos with a tape measure or marked dimensions can help, but they do not replace an engineering assessment.

Also report nearby machinery, doors, pipes, cable trays, and pedestrian routes. These can limit boom rotation, hook travel, or safe access for maintenance.

4. Describe the Duty Cycle, Controls, and Environment

Explain how frequently the crane will lift and how long it will operate each shift. A crane used for occasional maintenance may need a different duty classification from one serving a continuous production process. State whether you need a manual chain hoist or an electric wire-rope or chain hoist, and specify pendant, radio, or other control preferences.

For outdoor, washdown, dusty, or corrosive locations, describe exposure conditions clearly. Ask the supplier to identify any required ingress protection, coating system, corrosion allowance, or temperature limits in the offer.

Documents That Make a Quote More Accurate

A clear jib crane quote requirements package can include:

  • A dimensioned floor plan showing the crane, workstations, and load path.
  • Building, foundation, or support-structure drawings, if available.
  • Load specifications, lifting-point drawings, and photos of the workpiece.
  • Site photos showing overhead obstructions, access routes, and installation space.
  • Electrical supply details and any required control or safety features.
  • Applicable local design, inspection, and documentation requirements.

Ask the supplier to itemize the quoted scope, including the crane, hoist, controls, electrical components, shipping, installation, commissioning, training, and documentation. Confirm exclusions as well as included items so that competing offers can be compared fairly.

Standards, Inspection, and Safety Checks

Applicable requirements depend on the country, project specification, crane type, and site rules. Ask the manufacturer to state the design basis and the standards applicable to the proposed equipment. For example, EN 13001 may be relevant to crane design in projects using European requirements, while ASME B30.17 may apply to certain overhead, gantry, or monorail equipment in North American contexts. ASTM A36 may be specified for structural steel in some projects, but the material grade and suitability must be confirmed for the actual design. Standards are not interchangeable, and a reference to one standard does not automatically establish compliance with every local regulation.

Before ordering, request the technical data sheet, general arrangement drawing, load rating, operating instructions, and inspection or test documentation required for your project. Clarify the proposed inspection scope in writing. For example, a purchaser may specify 100% visual inspection of fabricated welds, with additional non-destructive examination where the design, risk assessment, or applicable code requires it. Do not treat that example as a universal legal requirement or as a claim about a particular supplier’s process.

Also ask who is responsible for foundation design, installation, commissioning, and any load testing. Testing criteria and records should follow the governing code and project requirements, not an assumed generic percentage of rated load.

Common Quotation Mistakes and Misconceptions

  • Giving capacity alone: Capacity does not define reach, lift height, duty, mounting, or coverage.
  • Measuring boom length instead of working radius: Specify the distance from the pivot axis to the load center.
  • Ignoring structural reactions: A crane transfers forces into a column, wall, or foundation; the support must be checked by a qualified professional.
  • Assuming all jib cranes rotate through 360 degrees: Rotation depends on the design, mounting, stops, and surrounding obstructions.
  • Comparing only the purchase price: Check the hoist, controls, freight, installation, commissioning, documentation, and warranty scope.
  • Assuming a quoted design is approved for every jurisdiction: Confirm local codes, permits, inspections, and required certification with the supplier and relevant authorities.

Example: Preparing a Workstation Jib Crane Request

A maintenance department needs to move machine components between a storage rack and a repair bench. Its initial request says only “500 kg jib crane.” That description leaves the supplier without enough information to estimate coverage, headroom, or duty.

The department improves the inquiry by adding a 500 kg maximum load, a 5 m working radius, a 4.5 m required hook height, 180-degree rotation, electric hoist operation, and the expected number of lifts per shift. It attaches a dimensioned plan, photos, and available floor and foundation drawings. The supplier can then identify open engineering questions, propose a suitable configuration, and separate equipment cost from installation and site work. The final design still requires verification against the actual structure and applicable requirements.

How to Request and Review the Quote

  1. Complete the jib crane quotation checklist and mark uncertain measurements.
  2. Send drawings, photographs, and load information together in one inquiry.
  3. Ask the supplier to confirm the design assumptions, duty classification, and applicable standards.
  4. Request a dimensioned arrangement drawing and a clearly itemized commercial offer.
  5. Review structural responsibilities, exclusions, delivery terms, commissioning, and documentation before placing an order.

If timing is important, state the required decision and delivery dates and ask the supplier to confirm its response time—for example, whether it can acknowledge the inquiry within 24 hours. This is a request to confirm a service commitment, not a guaranteed response time.

Prepare a Better Jib Crane Inquiry

What Information Is Needed for a Jib Crane Quotation? In practical terms, suppliers need the load, reach, lift height, mounting conditions, operating duty, controls, environment, compliance requirements, and project scope. A clear jib crane quotation checklist helps prevent omissions, supports safer equipment selection, and makes offers easier to compare.

When contacting Shandong Seven Sword Machinery Equipment Co., Ltd., provide the most complete information available and ask for written confirmation of assumptions, exclusions, and design standards. For a Column Mounted Jib Crane or another configuration, careful planning is the first step toward a crane system that fits the task and the site.

Latest News

November. 19, 2026

How to Protect a Jib Crane from Corrosion in Harsh Environments?
Protect a Column Mounted Jib Crane from corrosion by identifying exposure risks, removing salt and failed coatings, applying a compatible coating system, and inspecting critical parts. Use the crane manufacturer’s requirements and a qualified engineer’s assessment for structural damage.

November. 19, 2026

How to Choose the Right Rotation Angle?
How to Choose the Right Rotation Angle? This guide helps you select a Column Mounted Jib Crane rotation range by mapping workstations, checking clearances, confirming structural and load requirements, and testing the layout before installation.

November. 18, 2026

What Factors Affect Column Mounted Jib Crane Price?
This guide explains Column Mounted Jib Crane types, applications, benefits, price factors, and safe selection and installation. Use its checklist to prepare a project enquiry.
Related Products
1000kg Glass Vacuum Lifter for Curtain Wall Installation 1000kg Glass Vacuum Lifter for Curtain Wall Installation
The SsLifter QR1000G is a glass vacuum lifter with a rated capacity of 1000 kg, designed for lifting and positioning large glass panels with compatible lifting equipment. Its ten 300 mm suction pads are arranged across a support frame measuring 2300 × 900 mm, as specified in the parameter sheet.
800kg Glass Vacuum Lifter for Spider Cranes and Cranes 800kg Glass Vacuum Lifter for Spider Cranes and Cranes
The SsLifter QR800G is an 800 kg vacuum glass lifter designed for use with compatible spider cranes and other cranes. It combines vacuum gripping with remote-controlled positioning to help installers lift, orient and align large glass panels during glazing work. The crane provides lifting height and reach, while the attachment controls the panel position.
100kg Pneumatic Manipulator for Sanitary Ware Handling 100kg Pneumatic Manipulator for Sanitary Ware Handling
The SsLifter QR100T is a fixed column mounted pneumatic lifting manipulator for manually guided handling of workpieces. Its rated load capacity is 100 kg, with a 2500 mm arm length and maximum working radius, a 1600 mm lifting stroke, a 2550 mm column height and a maximum operating height of 3200 mm. The specified operating air pressure is 0.6–0.8 MPa.
3500kg Rough Terrain Telehandler for Construction Sites 3500kg Rough Terrain Telehandler for Construction Sites
The S3510 is a rough-terrain telehandler designed to lift, carry, and place materials across construction and industrial sites. The image shows the machine equipped with a fork carriage and telescopic boom for handling palletized or bundled loads. Its rated capacity is 3,500 kg, with a maximum lifting height of 10.5 m and a maximum outreach of 6.1 m.
3000kg Rough Terrain Telehandler for Farm & Construction 3000kg Rough Terrain Telehandler for Farm & Construction
The SsLifter S3007 is a rough-terrain telehandler designed to move palletized materials around outdoor construction, agricultural and industrial sites. Its telescopic boom and fork carriage combine forward reach with elevated placement, helping operators move loads where a conventional forklift may not have sufficient reach.
4000kg Telehandler for Construction & Farm Material Handling 4000kg Telehandler for Construction & Farm Material Handling
The S4014 serves projects that need a 4-ton telehandler for mid-to-high-level delivery. Its listed maximum lift height is 13.8 m and maximum outreach is 7 m, allowing crews to move suitable pallets and components from staging areas to elevated work positions. The specification lists a 114 HP engine, four-wheel steering and drive, and 167 L/min hydraulic flow. This configuration fits contractors who need more lift height than the 9.8 m class while working within a moderate outreach envelope. Always compare the planned load, attachment and boom position with the applicable load chart.
5 Ton Telehandler for Construction and Farm Applications 5 Ton Telehandler for Construction and Farm Applications
The S5018 is a 5,000 kg telehandler for projects that need material delivery at significant height and beyond the machine’s immediate footprint. Its listed maximum lift height is 17.55 m, with outreach up to 9.6 m, supporting staged placement of pallets and components on high-bay construction and industrial sites. The supplied specification lists a 122 HP Yuchai engine and 167 L/min hydraulic flow. Optional Cummins, Fiat and Perkins EPA engine packages are also listed for destination-market selection. Choose forks, a grab fork or a bucket only after checking the coupler, hydraulic demand and load chart for the exact configuration.
Custom Electric Tilting Telescopic Metal Sheet Vacuum Lifter Custom Electric Tilting Telescopic Metal Sheet Vacuum Lifter
The Fully Customized Electric Tilting Telescopic Vacuum Lifter is designed for handling large flat metal sheets and similar smooth, non-porous materials. The supplied drawing shows an adjustable main beam from 2500 to 4000 mm and adjustable cross beams from 1250 to 1500 mm, allowing the suction layout to be adapted to different workpiece sizes. The product image also shows a multi-suction-cup frame, electric control unit and a structure intended for tilting and telescopic adjustment.
wechat
whatsapp