A Column Mounted Jib Crane helps machine-shop teams move heavy parts through a local work area without carrying each load by hand or moving a larger overhead crane across the building. It can serve a machine, assembly bench, inspection station, or loading point. The right setup depends on the load, reach, clearance, building structure, and work cycle.
A jib crane can provide focused lifting coverage around a machine or workstation.
People researching jib cranes commonly want to know what jobs they can handle, how to choose capacity and reach, what installation involves, and how to avoid unsafe or costly mistakes. The guide below answers those practical questions for shop owners, production managers, maintenance teams, and purchasing groups.
Jib cranes handle localized lifting tasks around machine-shop workstations.
Common jobs include loading, unloading, and moving parts through a work cell.
A jib crane uses a horizontal boom, also called a jib, to move a suspended load around a defined work area. A hoist raises and lowers the load, while a trolley may travel along the boom to extend its position. Depending on its design, the boom may rotate around a supporting column or mounting point.
Typical machine-shop uses include:
Loading raw stock, castings, or blanks into a lathe, mill, press, or other machine.
Removing finished parts from machine tables and placing them on a cart or inspection bench.
Moving motors, fixtures, vises, dies, chucks, and tooling during changeovers or maintenance.
Positioning a component for assembly, repair, or inspection.
Moving loads between nearby workstations when the crane's rated capacity and coverage allow it.
A jib crane is useful when loads repeat in one defined area.
It can reduce repeated manual handling and keep a local lifting point close to the work. It is not a substitute for every material-handling system. A jib crane covers a limited area, and its supporting structure must safely carry the crane forces. For long travel routes or coverage across multiple production areas, compare it with bridge cranes, gantry cranes, or other suitable equipment.
Select a jib crane by matching its capacity and reach to the real job.
Confirm the load, working radius, lift height, and rotation before comparing products.
Purchasing teams often have to balance price with capacity, usable coverage, installation requirements, and production needs. Collect measurements and load details from the people who will use the crane before requesting a quotation.
Load: Record the heaviest routine load and any occasional heavier load. Include the weight of below-the-hook lifting devices, such as slings, magnets, or custom fixtures, when checking the load against the crane's rated capacity.
Reach: Measure the distance from the proposed rotation point to the farthest pick-up and set-down positions. Confirm the required radius against the manufacturer's stated working coverage.
Lift height: Measure from the floor to the highest required hook position and check the lowest position needed to pick up loads.
Rotation: Decide how much boom rotation the task needs and whether walls, machines, columns, doors, or other cranes restrict it.
Duty cycle: Estimate how often the crane will operate, the typical load, and the number of lifts per shift. Ask the manufacturer to recommend a suitable hoist and crane duty classification.
Mounting: Identify whether the crane will attach to a freestanding crane column or a verified building column. Do not assume an existing column or floor can support it.
Environment: Note dust, moisture, temperature, corrosive conditions, and any special electrical or operational requirements.
Compare the complete system, not only the headline capacity.
Check that the boom, trolley, hoist, controls, rotation arrangement, and supporting structure are suitable as a system. Ask suppliers to state the rated capacity, working radius, usable hook height, rotation range, duty information, power requirements, installation assumptions, inspection requirements, and included accessories. Clarify which items are excluded from the quotation, such as foundation work, electrical supply, or structural reinforcement.
Prepare the work area and tools before installation begins.
Gather measurements, approved drawings, and tools suited to the installation plan.
Installation requirements differ between a freestanding column-mounted crane and a crane attached to a building column. Use the manufacturer's instructions and approved engineering documents to determine the exact equipment and tools. A qualified installer should lead the work, and any structural review should be completed before drilling, anchoring, or assembly.
Planning and installation tools may include:
Tape measure and site layout drawings for recording dimensions and work-area clearances.
Spirit level, laser level, or plumb laser for checking alignment as specified in the installation instructions.
Calibrated torque wrench and approved fastening tools for specified fasteners.
Drill or core-drilling equipment only where approved drawings require it and the work is authorized.
Suitable lifting equipment, rigging, and tag lines for handling crane components safely.
Electrical tools and test equipment for qualified personnel completing the power and control connections.
Personal protective equipment, including safety footwear, gloves, eye protection, and head protection as required by the site plan.
Approved inspection and load-test equipment when required by the manufacturer, site rules, or applicable regulations.
Keep installation tools separate from routine operator checks.
Operators generally need access to the crane operating instructions, a clear inspection checklist, and any site-required reporting method. They should not adjust anchors, modify the crane, or perform electrical repairs unless they are qualified and authorized to do that work.
Install and commission the crane in a controlled sequence.
Follow these steps from site review through handover.
First step: Define the lifting task. Confirm the loads, lifting attachments, pick-up points, set-down points, frequency of use, required travel, and work-cell layout with operators and production staff.
Second step: Verify the supporting structure. Have a qualified professional check the building column, floor, foundation, and anchoring arrangement against the crane loads and approved design. Select a freestanding column when that is the specified solution.
Third step: Confirm the crane specification. Review rated capacity, boom length, rotation, hook height, trolley travel, hoist type, duty, power supply, and any required accessories against the actual task.
Fourth step: Approve the layout. Mark the crane location and working envelope. Check headroom, hook approach, machine access, walkways, doors, utilities, and potential collision points throughout the required rotation.
Fifth step: Prepare the site. Isolate the work area, confirm lifting and access plans, and complete foundation, anchoring, or structural work only as shown in approved documents. Allow specified materials to cure or settle before loading, where applicable.
Sixth step: Assemble and mount the crane. Use the manufacturer's sequence and suitable lifting equipment. Align, fasten, and secure the column, boom, trolley, and hoist as instructed. Do not substitute fasteners or alter components without written approval.
Seventh step: Complete electrical and control work. Have qualified personnel connect and check the power supply, pendant or other controls, travel functions, and emergency stop features included with the crane.
Eighth step: Inspect and test before production use. Check assembly, fasteners, alignment, controls, brakes, travel limits, and safety devices. Complete the commissioning and load testing required by the manufacturer and applicable site rules using an approved procedure.
Ninth step: Train operators and document the handover. Explain rated capacity, inspection responsibilities, safe load movement, prohibited practices, emergency procedures, and how to report defects. Keep manuals, inspection records, test results, and training records accessible.
Do not improvise structural or anchoring details.
Anchor size, embedment, torque, baseplate details, and foundation dimensions depend on the design and site conditions. Use approved engineering documents and the manufacturer's instructions rather than generic values. Stop the installation and ask the responsible professional if site conditions do not match the approved plan.
Operate the crane with a clear path and controlled loads.
Use a consistent pre-lift and load-movement routine.
Inspect the crane before use according to the operator checklist and site requirements.
Confirm the load weight and make sure the load plus below-the-hook equipment stays within the rated capacity.
Check that the hook, sling, lifting device, and attachment points are suitable and in good condition.
Position the hook above the load and attach the lifting equipment as directed by its manufacturer.
Take up slack slowly and raise the load just enough to check that it is balanced and secure.
Move the trolley and rotate the boom smoothly while keeping people clear of the suspended load.
Lower the load onto a stable surface, release the lifting equipment safely, and park the crane as instructed.
Report unusual noise, drift, damage, control problems, or other defects and remove the crane from service when required by site procedure.
Keep the load vertical and people outside the danger area.
Do not side-pull, drag a load, lift people, exceed the rated capacity, or leave a suspended load unattended. Do not allow anyone to stand under a suspended load. Keep loads controlled, avoid sudden starts and stops, and do not rotate into machines, structures, or people.
Avoid common mistakes that create safety and purchasing problems.
Check for these issues during specification, installation, and use.
Choosing capacity from the part weight alone: Include lifting attachments and account for the actual lifting task. Confirm the final selection with the manufacturer or qualified engineer.
Buying too little reach or hook height: Measure real pick-up and set-down locations, machine obstructions, and the hook's required vertical travel before ordering.
Assuming a building column is suitable: Verify the column and its connections for the crane loads. A visually substantial column is not proof of adequate capacity.
Ignoring duty cycle: A crane used repeatedly across shifts may need different components from one used occasionally. Provide honest usage estimates to the supplier.
Overlooking the full rotation path: Check for collisions with walls, machines, storage, utilities, and pedestrian routes before selecting the mounting location.
Using unapproved anchors or modifications: Follow approved engineering details and manufacturer instructions. Do not weld, drill, or alter structural parts without written authorization.
Side-pulling or dragging loads: Position the hook over the load and move it using the crane's intended travel and rotation functions.
Skipping inspection and operator training: Establish routine checks, reporting, and training before production use and maintain the required records.
Resolve uncertainties before approving a purchase order.
Ask the supplier to confirm the proposed crane's capacity, reach, height, duty, installation scope, power requirements, delivery contents, documentation, and service support in writing. Share site drawings and photographs when appropriate, and have structural questions reviewed before committing to a mounting arrangement.
Maintain the crane and review whether it still fits the job.
Use scheduled checks to find wear before it interrupts production.
Follow the inspection and maintenance schedule supplied with the crane and any applicable site or regulatory requirements. The exact inspection interval depends on crane type, usage, environment, and local rules. A routine program may include:
Checking hooks, latches, slings, chains, wire ropes, and lifting accessories for damage or wear.
Looking for loose fasteners, unusual movement, visible cracks, deformation, corrosion, or lubrication issues.
Testing hoist, trolley, rotation, controls, brakes, and safety devices as directed by the manufacturer.
Recording inspections, defects, repairs, and any required testing.
Taking defective equipment out of service until a qualified person has assessed and corrected the problem.
Review operating changes with the supplier or engineer.
Reassess the crane if loads become heavier, lift frequency increases, machines are relocated, or the work area changes. Do not increase capacity or modify reach based on production needs alone. A revised application may require new engineering review, a different crane, or changes to the supporting structure.
For machine shops comparing lifting options, Shandong Seven Sword Machinery Equipment Co., Ltd. can discuss application details and suitable crane configurations through its website at www.sslifter.com. Share the load, reach, height, duty cycle, and mounting information so the recommendation can address the real work area. A properly specified and maintained Column Mounted Jib Crane can make repetitive workstation lifting more controlled and efficient.
Protect a Column Mounted Jib Crane from corrosion by identifying exposure risks, removing salt and failed coatings, applying a compatible coating system, and inspecting critical parts. Use the crane manufacturer’s requirements and a qualified engineer’s assessment for structural damage.
How to Choose the Right Rotation Angle? This guide helps you select a Column Mounted Jib Crane rotation range by mapping workstations, checking clearances, confirming structural and load requirements, and testing the layout before installation.
This guide explains Column Mounted Jib Crane types, applications, benefits, price factors, and safe selection and installation. Use its checklist to prepare a project enquiry.
The SsLifter QR1000G is a glass vacuum lifter with a rated capacity of 1000 kg, designed for lifting and positioning large glass panels with compatible lifting equipment. Its ten 300 mm suction pads are arranged across a support frame measuring 2300 × 900 mm, as specified in the parameter sheet.
The SsLifter QR800G is an 800 kg vacuum glass lifter designed for use with compatible spider cranes and other cranes. It combines vacuum gripping with remote-controlled positioning to help installers lift, orient and align large glass panels during glazing work. The crane provides lifting height and reach, while the attachment controls the panel position.
The SsLifter QR100T is a fixed column mounted pneumatic lifting manipulator for manually guided handling of workpieces. Its rated load capacity is 100 kg, with a 2500 mm arm length and maximum working radius, a 1600 mm lifting stroke, a 2550 mm column height and a maximum operating height of 3200 mm. The specified operating air pressure is 0.6–0.8 MPa.
The S3510 is a rough-terrain telehandler designed to lift, carry, and place materials across construction and industrial sites. The image shows the machine equipped with a fork carriage and telescopic boom for handling palletized or bundled loads. Its rated capacity is 3,500 kg, with a maximum lifting height of 10.5 m and a maximum outreach of 6.1 m.
The SsLifter S3007 is a rough-terrain telehandler designed to move palletized materials around outdoor construction, agricultural and industrial sites. Its telescopic boom and fork carriage combine forward reach with elevated placement, helping operators move loads where a conventional forklift may not have sufficient reach.
The S4014 serves projects that need a 4-ton telehandler for mid-to-high-level delivery. Its listed maximum lift height is 13.8 m and maximum outreach is 7 m, allowing crews to move suitable pallets and components from staging areas to elevated work positions. The specification lists a 114 HP engine, four-wheel steering and drive, and 167 L/min hydraulic flow. This configuration fits contractors who need more lift height than the 9.8 m class while working within a moderate outreach envelope. Always compare the planned load, attachment and boom position with the applicable load chart.
The S5018 is a 5,000 kg telehandler for projects that need material delivery at significant height and beyond the machine’s immediate footprint. Its listed maximum lift height is 17.55 m, with outreach up to 9.6 m, supporting staged placement of pallets and components on high-bay construction and industrial sites. The supplied specification lists a 122 HP Yuchai engine and 167 L/min hydraulic flow. Optional Cummins, Fiat and Perkins EPA engine packages are also listed for destination-market selection. Choose forks, a grab fork or a bucket only after checking the coupler, hydraulic demand and load chart for the exact configuration.
The Fully Customized Electric Tilting Telescopic Vacuum Lifter is designed for handling large flat metal sheets and similar smooth, non-porous materials. The supplied drawing shows an adjustable main beam from 2500 to 4000 mm and adjustable cross beams from 1250 to 1500 mm, allowing the suction layout to be adapted to different workpiece sizes. The product image also shows a multi-suction-cup frame, electric control unit and a structure intended for tilting and telescopic adjustment.